3D Potter 10 XL Clay Printer

3D Potter 10XL clay printer uses its strongest motors and has 30% more printing area than its standard size model, allowing for even more creative designs.

The 10 XL ceramic 3D printer can print vessels up to 28" (71 cm) high. The 10 XL has the largest extruder out of all 3D Potter printers, holding 18 pounds of clay. This lets you print more and reload less. With a 4000 ml extruder, you can print dozens of objects and still have clay left over.

3D Potter clay printers use high-quality anodized aluminum rails. These rails are robust and have a smooth surface, allowing for easy movement of parts while being able to withstand classroom or industrial environments.

The unique feature of 3D Potter printers is the direct extrusion of real clay. Other brands use a compressed air system printing with slip (watered down clay or an alcohol diluted clay). The advantage of direct extrusion is the ability to print with full bodied clay, or other paste-like materials. All materials used to build 3D Potter printers are food grade, so get creative.

The 10th generation ceramic 3D printer brings a full web interface controlled over WiFi. You can now control and upload files to the printer from multiple devices simultaneously. The interface allows you full control over every setting of the machine.

The 10th generation also has a uniform nozzle design across all of our printers. This allows you to interchange nozzles between all of our printers, from the Micro to the Scara V3.

1. 3D PotterBot 10 XL

2. Closed loop stepper on X, Y, Z, extruder

3. 3600 ml or 4000 ml extruder, 2 tubes and anti-Rotator

4. Anodized aluminum print nozzles (in sizes: 3, 4, 5, and 6 mm)

5. Parts Box: Alan key set, grease, Acme driver tool

6. Power Supply

7. Wall mount bracket

Specifications

Printing Envelope:
X-19.3" (490 mm)
Y-19.3" (490 mm)
Z-28" (710 mm)

Printer size:
W-32” L-40” H-47”
Normal operation space needed 3600 ml: W-32” L-40” H-82”
Normal operation space needed 4000 ml: W-32” L-40” H-85”
Maximum operation space needed: W-35” L-42” H-89”
Print Bed 15x15” (381x381 mm)
Height with the extruder fully extended is 89” (2260 mm)
Weight with extruder: 60 lbs.

Recommended print speed: 0.4”/s’ to 7.9’’/s (10 to 200 mm/s)
Maximum print speed: 7.9”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~6 amps, ~144 Watts
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4

Full control through the web interface, no apps or software installation.